Exploring age and gender variations in root canal morphology of maxillary premolars in Saudi sub population: a cross-sectional CBCT study.

BACKGROUND: In complex teeth like maxillary premolars, endodontic treatment success depends on a complete comprehension of root canal anatomy. The research on mandibular premolars' root canal anatomy has been extensive and well-documented in existing literature. However, there appears to be a notable gap in available data concerning the root canal anatomy of maxillary premolars. This study aimed to explore the root canal morphology of maxillary premolars using cone-beam computed tomography (CBCT) imaging, considering age and gender variations. METHODS: From 500 patient CBCT scans, 787 maxillary premolar teeth were evaluated. The sample was divided by gender and age (10-20, 21-30, 31-40, 41-50, 51-60, and 61 years and older). Ahmed et al. classification system was used to record root canal morphology. RESULTS: The most frequent classifications for right maxillary 1st premolars were 2MPM1 B1 L1 (39.03%) and 1MPM1 (2.81%), while the most frequent classifications for right maxillary 2nd premolars were 2MPM1 B1 L1 (39.08%) and 1MPM1 (17.85%). Most of the premolars typically had two roots (left maxillary first premolars: 81.5%, left maxillary second premolars: 82.7%, right maxillary first premolars: 74.4%, right maxillary second premolars: 75.7%). Left and right maxillary 1st premolars for classes 1MPM1 and 1MPM1-2-1 showed significant gender differences. For classifications 1MPM1 and 1MPM1-2-1, age-related changes were seen in the left and right maxillary first premolars. CONCLUSION: This study provides novel insights into the root canal anatomy of maxillary premolars within the Saudi population, addressing a notable gap in the literature specific to this demographic. Through CBCT imaging and analysis of large sample sizes, the complex and diverse nature of root canal morphology in these teeth among Saudi individuals is elucidated. The findings underscore the importance of CBCT imaging in precise treatment planning and decision-making tailored to the Saudi population. Consideration of age and gender-related variations further enhances understanding and aids in personalized endodontic interventions within this demographic.

Morphology and classification of the second mesiobuccal canal in maxillary first molars: a cone-beam computed tomography analysis in a Chinese population.

BACKGROUND: Understanding the tooth anatomy is crucial for ensuring effective endodontic treatment. This study investigated the root canal morphology of the second mesiobuccal (MB2) canal in maxillary first molars (MFMs) in a Chinese population using cone-beam computed tomography (CBCT). METHODS: This study evaluated 486 MFMs with MB2 canals from 285 participants undergoing CBCT examination and determined the Vertucci's classification and position of the MB2 canal orifice. The prevalence of the MB2 canal was correlated with the sex, age, and tooth side. The correlations between the prevalence of the MB2 canal and sex and tooth side were assessed using the Fisher's exact test. The chi-square test was used for evaluating the correlation between the prevalence of the MB2 canal and age. RESULTS: The number of type II, III, IV, V, VI, VII, and other root canals in the MFMs was 30.9%, 0.6%, 65.0%, 1.2%, 1.2%, 0.4%, and 0.6%, respectively. Among the 201 cases with bilateral inclusion, 87.6% showed consistent canal configuration. Results of the first clear apparent position (FCAP) of the MB2 canals showed that 434, 44, and 3 teeth had FCAP at the upper, middle, and bottom one-third of the root, respectively. The FCAPs of the MB2 canal in the MFMs with types II, IV, and VI, as well as types III and V canals showed significant differences (p<0.05). The horizontal distance between the MB1 and MB2 canal orifices in the type II canals of MFMs was significantly lesser than those in the type IV canals of MFMs (p < 0.01). The longitudinal distance between the pulp chamber floor plane and MB2 canal orifice significantly correlated with age (p < 0.05). CONCLUSIONS: The morphology of the mesiobuccal root canal in the MFMs is complex. Complete understanding of the anatomical morphology of the root canal combined with the CBCT and dental operating microscope is necessary for the accurate detection of the MB2 canal and consequently improved success rate of root canal treatment. Our study findings can help endodontists improve endodontic treatment outcomes.

Canine sexual dimorphism in crown and root dimensions: a cone-beam computed tomographic study.

The primary step in forensic odontological analysis is sex determination. The present study is one of the few studies that evaluated the accuracy of the combination of canine tooth root length and crown measurements for sex determination. The study sample comprised 196 cone-be am computed tomographic scans of individuals aged 20-80 years distributed in five age categories: 20-29, 30-39, 40-49, 50-59, and 60+ years old. Different parameters, such as width, length, and ratio measurements for the crown and root of each maxillary and mandibular canine tooth, were examined and recorded. The findings indicated that maxillary canines had greater sex dimorphism ability (87.3%) than mandibular canines (80.6%). Total tooth length and root length of maxillary canine were the most pronounced variables in the differentiation of sex groups. When the combination of the mandibular and maxillary measurements was considered, the accuracy for sex dimorphism was 85.7%. By using ratio variables, the accuracy was reduced to 68.9%. According to the findings of this study, total tooth length and root length are the most discriminant variables of canine teeth. These variables are more reliable sex indicators than crown measurements.

Volumetric Analysis of Peri-implant Tissue Change Over Time: Validating an Innovative 3D Method.

PURPOSE: To validate an innovative 3D volumetric method of evaluating tissue changes proposed by Lee et al in 2020 by comparing the results of this method-in which the scanned peri-implant surfaces were transformed, visualized, and analyzed as 3D objects-to the results reported by an existing method based on calculation of the mean distance between measured surfaces. The null hypothesis was that there was no statistically significant difference between the two methods. Additionally, the present study evaluated peri-implant tissue changes 5 years after single implant placement in the esthetic zone. MATERIALS AND METHODS: Both methods were applied to 11 oral implant site casts (6 maxillary central incisor sites, 5 maxillary lateral incisor sites) taken from 11 patients at crown placement and at follow-up examinations 5 years later. The methods are based on digital workflows in which the reference and 5-year casts are scanned and the resulting STL files are superimposed and analyzed for three regions of interest (mesial papilla, central area, and distal papilla). The volumetric changes reported by the Lee et al method and the mean distance method were calculated and compared using the Spearman rank correlation coefficient (P < .01) and the Wilcoxon signed-rank test (P < .05). RESULTS: The correlation between the two sets of measurements was very high (Spearman rank correlation coefficient = 0.885). The new volumetric method indicated a mean volume loss of 2.82 mm3 (SD: 5.06), while the method based on the measurement of mean distance showed a mean volume loss of 2.92 mm3 (SD: 4.43; Wilcoxon signed-rank test result: P = .77). No statistically significant difference was found. The two methods gave equivalent results, and the null hypothesis was accepted. CONCLUSIONS: The new volumetric method was validated and can be considered a trustworthy tool.

Dimensional stability of 3D-printed edentulous and fully dentate hollowed maxillary models over periods of time.

BACKGROUND: Dental casts made utilising digital workflow are becoming more common because to their speed and cost savings. However, studies on their dimensional accuracy over time with diverse designs are missing. OBJECTIVE: The aim of this in vitro study was to assess the dimensional stability of 3D-printed edentulous and fully dentate hollowed maxillary models with 50-micrometer resolution over 1 day, 14 days, and 28 days using surface matching software. METHODS: Scanned edentulous and fully dentate maxillary typodont models were used as references. The models were scanned by a desktop lab scanner of 15-micrometer accuracy (D900, 3Shape). Then, the files were used in designing software (Meshmixer, Autodesk) to create hollowed maxillary casts. Fifteen edentulous and 15 fully dentate (total of 30) models were printed using a DLP lab printer (Cara print 4.0, Kulzer). The 3D-printed models were scanned using the same desktop lab scanner of 15-micrometer accuracy at intervals of baseline days, 1 day, 14 days, and 28 days to assess the effect of aging (n = 120). The dimensional changes were quantified and compared using the root mean square (RMS) method, expressed in micrometres (µm). The study employed repeated measures analysis of variance (ANOVA) to assess and compare the root mean square (RMS) values across the variables. The data was analysed using SPSS (26, Chicago, Illinois, USA). RESULTS: The RMS of the edentulous models rapidly increased from a mean value of 0.257 at the beginning of the study to 0.384 after twenty-eight days. However, the mean RMS values for the dentate models did not change much over the four intervals. It varied only from 0.355 to 0.347. The mean values for edentulous patients increased from 0.014 to 0.029 during the period from baseline to twenty-eight days. However, the mean average values decreased for the dentate models from 0.033 to 0.014 during this period. By utilizing ANOVA, mean RMS values increased insignificantly till one day but significantly to fourteen and twenty-eight days. Dentate model mean values differed insignificantly across four intervals. Repeated measures ANOVA for combined and separated data showed no significant differences across edentulous, dentate, and total models over times. CONCLUSION: The study revealed changes in the dimensions of 3D-printed edentulous models over a span of 3 and 4 weeks. Caution should be applied when using 3D-printed dental master models for constructing definitive prostheses on edentulous models over a period of 3 to 4 weeks.

Cone-beam computed tomography of accessory canals of the canalis sinuosus and analysis of the related risk factors.

PURPOSE: Cone-beam computed tomography (CBCT) was used in this study for evaluating the diameter, prevalence, spatial location, and risk factors of the accessory canal (AC) of the canalis sinuosus. METHODS: A comprehensive assessment of the incidence rate, diameter, three-dimensional (3D) spatial location, and direction of travel of AC was performed on 1003 CBCT images. The CBCT data were used to reconstruct a 3D model of the maxilla to determine the alveolar bone volume. The obtained data were further analyzed and processed. RESULTS: AC was present in 50.1% of images. Male patients more frequently had ACs than female patients did (P < 0.01) and was positively correlated with the maxillary alveolar bone volume (P < 0.001, OR 1.532). Age or nasopalatine canal diameter were not significantly associated with the occurrence of AC (P > 0.05). Among the 502 patients with AC, AC was present on the left side, right side, and bilaterally in 189, 98, and 215, respectively. The maximum number of ACs observed per individual was eight. The average AC diameter was 0.89 ± 0.26 mm (minimum, 0.5 mm; maximum, 2.02 mm). CONCLUSIONS: As the prevalence of AC and its trajectory display considerable variation among individuals, surgeons must consider the possibility of the presence of AC when devising surgical plans involving the anterior maxillary region.

Precise tooth design using deep learning-based templates.

OBJECTIVES: In prosthodontic procedures, traditional computer-aided design (CAD) is often time-consuming and lacks accuracy in shape restoration. In this study, we combined implicit template and deep learning (DL) to construct a precise neural network for personalized tooth defect restoration. METHODS: Ninety models of right maxillary central incisor (80 for training, 10 for validation) were collected. A DL model named ToothDIT was trained to establish an implicit template and a neural network capable of predicting unique identifications. In the validation stage, teeth in validation set were processed into corner, incisive, and medium defects. The defective teeth were inputted into ToothDIT to predict the unique identification, which actuated the deformation of the implicit template to generate the highly customized template (DIT) for the target tooth. Morphological restorations were executed with templates from template shape library (TSL), average tooth template (ATT), and DIT in Exocad (GmbH, Germany). RMSestimate, width, length, aspect ratio, incisal edge curvature, incisive end retraction, and guiding inclination were introduced to assess the restorative accuracy. Statistical analysis was conducted using two-way ANOVA and paired t-test for overall and detailed differences. RESULTS: DIT displayed significantly smaller RMSestimate than TSL and ATT. In 2D detailed analysis, DIT exhibited significantly less deviations from the natural teeth compared to TSL and ATT. CONCLUSION: The proposed DL model successfully reconstructed the morphology of anterior teeth with various degrees of defects and achieved satisfactory accuracy. This approach provides a more reliable reference for prostheses design, resulting in enhanced accuracy in morphological restoration. CLINICAL SIGNIFICANCE: This DL model holds promise in assisting dentists and technicians in obtaining morphology templates that closely resemble the original shape of the defective teeth. These customized templates serve as a foundation for enhancing the efficiency and precision of digital restorative design for defective teeth.

Maxillary morphology of chimpanzees: Captive versus wild environments.

Morphological studies typically avoid using osteological samples that derive from captive animals because it is assumed that their morphology is not representative of wild populations. Rearing environments indeed differ between wild and captive individuals. For example, mechanical properties of the diets provided to captive animals can be drastically different from the food present in their natural habitats, which could impact cranial morphology and dental health. Here, we examine morphological differences in the maxillae of wild versus captive chimpanzees (Pan troglodytes) given the prominence of this species in comparative samples used in human evolution research and the key role of the maxilla in such studies. Size and shape were analysed using three-dimensional geometric morphometric methods based on computed tomography scans of 94 wild and 30 captive specimens. Captive individuals have on average larger and more asymmetrical maxillae than wild chimpanzees, and significant differences are present in their maxillary shapes. A large proportion of these shape differences are attributable to static allometry, but wild and captive specimens still differ significantly from each other after allometric size adjustment of the shape data. Levels of shape variation are higher in the captive group, while the degree of size variation is likely similar in our two samples. Results are discussed in the context of ontogenetic growth trajectories, changes in dietary texture, an altered social environment, and generational differences. Additionally, sample simulations show that size and shape differences between chimpanzees and bonobos (Pan paniscus) are exaggerated when part of the wild sample is replaced with captive chimpanzees. Overall, this study confirms that maxillae of captive chimpanzees should not be included in morphological or taxonomic analyses when the objective is to characterise the species.

Cranial anatomy of Libognathus sheddi Small, 1997 (Parareptilia, Procolophonidae) from the Upper Triassic Dockum Group of West Texas, USA.

Libognathus sheddi, a leptopleuronine procolophonid from the Upper Triassic Cooper Canyon Formation, Dockum Group, West Texas, was based on an isolated left dentary and partial coronoid. New material referable to Libognathus sheddi, from the Cooper Canyon Formation, provides new information on the cranial anatomy. This new cranial material includes the antorbital portion of a skull, a left maxilla and premaxilla, quadratojugals, and dentaries, including intact tooth rows in the upper and lower jaws. Libognathus shows autapomorphies including; dentary deep with ventral margin oblique to tooth row immediately from the symphysis at ≥23°; anterior projecting coronoid contacting the lingual surface of the dentary underlying the last two dentary teeth; reduced contact between the lacrimal and the nasal; suborbital foramen formed by the maxilla and ectopterygoid, excluding the palatine; a posterior supralabial foramen shared by the maxilla and jugal; a Y-shaped antorbital pillar formed by the palatine, and massive orbitonasale and facial foramina (shared with unnamed southwest USA leptopleuronines). Phylogenetic analysis indicates that Libognathus is a highly derived leptopleuronine procolophonid, closely related to Hypsognathus fenneri and other southwest USA Revueltian leptopleuronines, which fall out as sister taxa to Hypsognathus, a relationship supported by a maxillary dentition restricted anterior to the orbital margin, a possibly synapomorphic orbitonasale septum in the form of an "antorbital pillar" created by the palatine, an anteroventral process of the jugal, and the presence of a small diastema between the first dentary tooth and the more posterior dentition. Libognathus exhibits a possible ankylosed protothecodont tooth implantation with frequent replacement, differing from some other proposed procolophonid implantation and replacement models. Chinle Formation and Dockum Group leptopleuronines are restricted to the Revueltian teilzone/holochronozone, making them possible Revueltian index taxa.

Alveolar bone morphology in patients with palatally-displaced maxillary lateral incisors before and after orthodontic treatment: A cone-beam computed tomography study.

INTRODUCTION: Palatal displacement of maxillary anterior teeth is common in clinical practice. Previous studies have reported that the labial bone around palatally-displaced incisors is thinner than that around normally-placed teeth. Therefore, it is necessary to elucidate alveolar bone changes after alignment to guide orthodontic treatment. In this study, we investigated the alveolar bone changes around palatally-displaced maxillary lateral incisors before and after treatment, and the effects of extraction and age using cone-beam computed tomography. METHODS: In this retrospective study, 55 patients with unilateral palatally-displaced maxillary lateral incisors were included. Three-dimensional alveolar bone changes were measured at three levels (25%, 50% and 75% of the root length) using cone-beam computed tomography. Group comparisons were made between displaced and control teeth, extraction and non-extraction groups, and adult and minor groups. RESULTS: After orthodontic treatment, labiopalatal and palatal alveolar bone widths decreased at all measured levels. Labial alveolar bone width increased significantly at P25, but decreased at P75. Concavity decreased, while tooth-axis angle, tooth length, B-CEJ and P-CEJ increased. Changes in LB and LP at P75, B-CEJ and P-CEJ were statistically significant. After treatment, the tooth-axis angle on the PD side increased by 9.46°. The change in tooth-axis angle on the PD side was significantly smaller, and LB and LP decreased more at P75, in the extraction group. CONCLUSIONS: Compared to the control teeth, alveolar bone thickness and height for the displaced teeth decreased more significantly after treatment. Tooth extraction and age also influenced alveolar bone changes.

What is missing from the sturgeon jaw: Developmental morphology of the upper jaw in Acipenser.

Sturgeons belong to the family Acipenseridae, the most species-rich extant family of Acipenseriformes, a basal actinopterygian group of key importance in assessing the early radiations of the actinopterygians. At the same time, acipenseriforms display unique specializations in the morphology of the snout and jaws which make them a valuable model for studying evolutionary novelties. However, despite a long history of research, the homologies of the snout and the mandibular arch of acipenseriforms remain uncertain preventing further studies on the evolutionary origin of their unique snout and jaw structure, and in particular, of the upper jaw symphysis, the key apomorphy of the group and the preoral snout. In the present study, a detailed description of the upper jaw morphology and development in sturgeons is provided in order to address its composition in terms of the common actinopterygian archetype. Based on the obtained results, the upper jaw of acipenseriforms is assumed to have lost the autopalatine portion, which most likely is represented by the separate cartilages supporting the tentacles. Also, the conventional interpretation of the sturgeon's maxilla as dermopalatine is rejected on the grounds of this bone structure and development. Paedomorphosis is proposed to be the most likely mechanism explaining the evolutionary origin of the upper jaw symphysis and supposed modifications of the snout in sturgeons.

Second mesiobuccal canal segmentation with YOLOv5 architecture using cone beam computed tomography images.

The objective of this study is to use a deep-learning model based on CNN architecture to detect the second mesiobuccal (MB2) canals, which are seen as a variation in maxillary molars root canals. In the current study, 922 axial sections from 153 patients' cone beam computed tomography (CBCT) images were used. The segmentation method was employed to identify the MB2 canals in maxillary molars that had not previously had endodontic treatment. Labeled images were divided into training (80%), validation (10%) and testing (10%) groups. The artificial intelligence (AI) model was trained using the You Only Look Once v5 (YOLOv5x) architecture with 500 epochs and a learning rate of 0.01. Confusion matrix and receiver-operating characteristic (ROC) analysis were used in the statistical evaluation of the results. The sensitivity of the MB2 canal segmentation model was 0.92, the precision was 0.83, and the F1 score value was 0.87. The area under the curve (AUC) in the ROC graph of the model was 0.84. The mAP value at 0.5 inter-over union (IoU) was found as 0.88. The deep-learning algorithm used showed a high success in the detection of the MB2 canal. The success of the endodontic treatment can be increased and clinicians' time can be preserved using the newly created artificial intelligence-based models to identify variations in root canal anatomy before the treatment.

Three-dimensional analysis of the alveolar ridge profiles of maxillary central incisors in children for autotransplantation.

BACKGROUND: Sufficient alveolar housing is fundamental to ensure the favorable prognosis of autotransplanted teeth. However, little is known about the alveolar ridge profiles of the anterior maxilla in children. Therefore, this study aimed to investigate the alveolar ridge profiles of the anterior maxilla in growing children. METHODS: A total of 169 Korean children aged 10-13 years old were included in this retrospective study. Demographic data and cone-beam computed tomography scans of 244 maxillary central incisors were collected. For each tooth, the alveolar ridge thickness was determined at 1-, 3-, and 5-mm levels below the cemento-enamel junction. The alveolar process height and labial concavity were also evaluated. Statistical analyses were performed to evaluate differences according to age and sex. RESULTS: The alveolar ridge thickness did not differ according to age. The alveolar ridge thickness in males was significantly greater than that in females among those aged 10 and 11 years. The average alveolar process height was 17.43 ± 2.22 mm. The alveolar process height hardly changed with age from 10-13 years, whereas the alveolar process height of males was significantly greater compared with that of females among those aged 10 years. The labial concavity was approximately 150˚, with no significant differences between age and sex. CONCLUSIONS: Within the limits of this study, the anatomy of the alveolar ridge in the maxillary central incisors showed sufficient capacity as a recipient site for autotransplantation using mandibular premolars, especially in males. These findings serve as a valuable resource for facilitating autotransplantation in children.

Metric evaluation of the anterior nasal spine to estimate sex and population group in South African individuals.

INTRODUCTION: The anterior nasal spine is a pointed, midline projection of the maxilla. This bony structure dictates the overlying soft tissues providing the phenotypic features of the nose and upper lip and determines the differences in the mid-face morphology. Little data is available on the metric features of the Anterior nasal spine (ANS). This study aimed to perform metric evaluations of the ANS of white and black South African males and females to ascertain if morphological variations exist and if the differences are viable for the use in sex and population identification. MATERIALS AND METHODS: The sample included 100 CBCT images for each population and sex group. Linear and angular measurements of the ANS were recorded in both the sagittal and axial planes. RESULTS: Classification decision trees (pruned) were fitted to ascertain the relationship between population group, sex and the ANS measurements including and excluding age. For population group, all the ANS measurements were statistically significant for females but in males, all the ANS measurements were significant when performed individually. However, when fitted to the classification tree, Sagittal 2 did not show any statistical significance. When considering sex, only 2 of the ANS measurements (Sagittal 2 and Axial 1) were found to be significant. The results did not differ significantly when comparing the decision trees including and excluding age. CONCLUSIONS: White South African individuals presented with a longer ANS that produced a more acute angle whereas black South African individuals presented with a shorter ANS and a more obtuse angle. Additionally, males presented with a longer ANS compared to females. ANS measurements were found to be more relevant for population discernment than for sex.

Morphometric Evaluation of Morphological Variations of the Nasopalatine Canal: A Retrospective Study Using Cone-beam Computed Tomography.

AIM: The study aimed to analyze the morphological and anatomical variations of the nasopalatine canal (NPC) using cone-beam computed tomography (CBCT) images and their association with age and gender among the subpopulation of the Qassim region of Saudi Arabia. MATERIALS AND METHODS: The CBCT records of 401 patients referred to the Department of Radiology between January 2020 and July 2023 were randomly selected in the retrospective cross-sectional study. The anatomical characteristics such as the length of the NPC, and the superior and inferior width of the canal, were analyzed. In the sagittal and axial planes, the morphological variants of the shape of the NPC were also investigated. The Statistical Package for the Social Sciences (SPSS) software was used for statistical analyses at a 5% significance level. RESULTS: The study examined the CBCT images of 219 females (54.6%) and 182 males (45.4%) with an overall mean age of 40.17 ± 2.31 years. The overall length of the NPC and superior and inferior canal width were 13.86 ± 2.68 mm, 3.4 ± 1.42 mm, and 4.07 ± 2.06 mm, respectively. Independent t-test revealed that the males had a statistically significant larger superior (3.62 ± 1.78 mm) and inferior canal width (4.33 ± 1.79 mm). In terms of gender, the Chi-square test revealed a statistically significant association (p < 0.01) between the morphological shape of the NPC in the axial and sagittal planes. The heart-shaped (51.4%) and cone-shaped canals (34.2%) were the most frequently recorded NPC in the axial and sagittal planes, respectively. Pearson's correlation found a statistically significant positive relationship (p < 0.05) between the superior and inferior canal width and the canal length. Spearman's correlation revealed a statistically highly significant correlation between the NPC shape in the sagittal plane and gender (p < 0.001). CONCLUSION: The study findings revealed a statistically significant difference in the anatomical and morphological traits of the NPC in the axial and sagittal planes based on gender. The effect of age and gender was found to exhibit significant differences with the NPC parameters. The heart-shaped canal in the axial plane and the cone-shaped canal in the sagittal plane were more prevalent in the study sample. A three-dimensional (3D) examination of the NPC will be crucial to avert challenging circumstances prior to surgical treatments in the anterior maxilla. CLINICAL SIGNIFICANCE: The NPC is a long, narrow canal that can take up to 58% of the buccal bone plate width, and an accurate 3D anatomic illustration of the NPC allows for reliable surgical planning and dental implant placement.

Impact of different cephalometric skeletal configurations on anatomic midface parameters in adults.

OBJECTIVES: Skull morphology and growth patterns are essential for orthodontic treatment, impacting clinical decision making. We aimed to determine the association of different cephalometric skeletal configurations on midface parameters as measured in 3D CT datasets. MATERIALS AND METHODS: After sample size calculation, a total of 240 fully dentulous patients between 20 and 79 years of age (mean age: 42 ± 15), who had received a CT of the skull within the scope of trauma diagnosis or intracranial bleeding, were retrospectively selected. On the basis of cephalometric analysis, using MPR reconstructions, patients were subdivided into three different vertical skull configurations (brachyfacial, mesofacial, dolichofacial) and the respective skeletal Class I, II, and III relationships. Anatomic parameters were measured using a three-dimensional post-processing console: the thickness of the maxillary and palatine bones as well as the alveolar crest, maxillary body and sutural length, width and height of the hard palate, maxillary facial wall thickness, and masseter muscle thickness and length. RESULTS: Individuals with brachyfacial configurations had a significantly increased palatal and alveolar ridge thicknesses compared to those with dolichofacial- or mesofacial configurations. Brachyfacial configurations presented a significantly increased length and thickness of the masseter muscle (4.599 cm; 1.526 cm) than mesofacial (4.431 cm; 1.466 cm) and dolichofacial configurations (4.405 cm; 1.397 cm) (p < 0.001). Individuals with a skeletal Class III had a significantly shorter palatal length (5.313 cm) than those with Class I (5.406 cm) and Class II (5.404 cm) (p < 0.01). Sutural length was also significantly shorter in Class III (p < 0.05). CONCLUSIONS: Skeletal configurations have an impact on parameters of the bony skull. Also, measurable adaptations of the muscular phenotype could result. CLINICAL RELEVANCE: The association between viscerocranial morphology and midface anatomy might be beneficial for tailoring orthodontic appliances to individual anatomy and planning cortically anchored orthodontic appliances.

Evaluation of safe areas for miniscrew use according to various skeletal anomalies with CBCT.

OBJECTIVES: We aimed to determine safe areas to apply miniscrews in the interradicular region of the maxilla and mandible in individuals with various sagittal skeletal malocclusions. MATERIALS AND METHODS: Cone beam-computed tomography images of 159 individuals were used. Individuals were divided into three groups: Class I, Class II, and Class III. In the sagittal plane, 3-6-9-mm apical sections were determined from the alveolar crest apex. The buccal cortical bone thickness, interradicular distance, and buccolingual bone distances were measured. RESULTS: In the buccal cortical bone thickness, we observed statistically significant differences between the classes except for the 1-1 region in the maxilla and all regions and sections in the mandible (p < 0.05). The differences in the buccolingual bone distance between classes were statistically significant, except for the 3-mm and 6-mm sections in the 3-4 and 4-5 regions of the maxilla, the 9-mm sections in the 1-2 and 2-3 regions, the 6-mm and 9-mm sections in the 3-4 region, and the 6-mm section in the 4-5 regions of the mandible (p < 0.05). The differences in the interradicular bone distance were statistically significant between the classes in all regions and sections of the mandible except the 6-mm sections in the 1-2 region and in all sections of the maxilla except the 6-mm sections in the 3-4 region (p < 0.05). CONCLUSIONS: We observed significant differences in the buccal cortical bone thickness, interradicular bone distance, and buccolingual bone distance among individuals. CLINICAL RELEVANCE: Understanding the anatomy of interradicular regions and preventing complications.

Topography of the infraorbital foramen in human skulls originating from different time periods.

BACKGROUND: The infraorbital foramen (IOF) is present on the maxilla under the infraorbital margin. Its identification is essential in various surgical procedures. The main aim of this study was the morphometric assessment of the position of the right and left infraorbital foramina in relation to specific structural elements of the facial skeleton, their width and direction, and also the determination of the location of these foramina above maxillary teeth in examined male skulls (belonging to European populations) dated to the beginning of the 20th century and the medieval and post-medieval period. This aim concerned also the assessment of the symmetry of the examined foramina (their location and size). An additional goal was to determine differences between the cranial samples concerning the analysed traits. MATERIALS AND METHODS: The six metric and two non-metric traits concerning the IOF were collected from the male cranial samples including modern skulls (n = 87), the medieval and post-medieval skulls (from 13th centuries and 15-17th centuries, respectively; n = 47) obtained from archaeological excavations in Wroclaw, and the sample of the medieval skulls (11-13th centuries, n = 100) from Sypniewo. The sex and age of the specimens were determined using the standard methodology. The appropriate statistical analysis was performed. RESULTS: Significant differences were established for three traits (taken from the left and right side) in the case of modern skulls (diameter of IOF, its distance to the midline, and zygomaticomaxillary suture) and one in the case of medieval skulls from Sypniewo (distance to the midline). In all of the cranial samples IOF most frequently occurred above the first upper molar. The greater diameter of IOF and its shorter distance to the alveolar crest and nasal notch were observed in non-modern skulls compared to modern skulls. CONCLUSIONS: The results of this study provide new additional data on the topography of IOF and its asymmetry, confirm the presence of both geographical and chronological differences between populations, and can be used in dental practice, and forensic odontology in the analysis of archaeological bone materials.

Estudio Anatómico y Prevalencia del Canalis sinuosus Evaluado Mediante Cone Beam CT en Pacientes Chilenos / Anatomical Study and Prevalence of Canalis sinuosus Evaluated by Cone Beam CT in Chilean Patients

Canalis sinuosus, canal intraóseo localizado en región maxilar anterior, contiene elementos vasculonerviosos alveolares anterosuperiores. Diversas intervenciones en región maxilar anterior como colocación de implantes, exodoncias, instalación de microtornillos ortodóncicos, procedimientos quirúrgicos, entre otros, pueden comprometer al Canalis sinuosus y/o sus canales accesorios dañando los elementos contenidos en su interior causando complicaciones como hemorragias, parestesia, disestesia, etc. Dado el gran desconocimiento de su existencia, el Canalis sinuosus frecuentemente es confundido con lesiones patológicas y/o endodónticas. Clásicamente la literatura lo describe como una variación anatómica variación anatómica, sin embargo, presenta elevadas prevalencias (51,7 %-100 %), siendo cuestionada esta aseveración. Determinar prevalencia y característica s anatómicas del Canalis sinuosus mediante Cone Beam CT en pacientes chilenos del centro radiológico IMAPROX® entre 2017- 2021. Análisis retrospectivo de 220 CBCT maxilares anonimizados, considerando variables sexo, presencia del Canalis sinuosus, Canalis sinuosus uni/bilateral, diámetro mayor del Canalis sinuosus, presencia/número de accesorios. Análisis estadístico uni y bivariado. 100 % de prevalencia del Canalis sinuosus en ambos sexos, presencia bilateral 100 %. Diámetro mayor promedio del Canalis sinuosus: 2,58 mm. El 76,8 % presentó accesorios, siendo más prevalente la presencia de 2 CA (34,1 %). Una estructura anatómica normal habitual debe presentar sobre 50 % de prevalencia para ser considerada como tal, pero no hay consensos en criterios empleados para definir variación anatómica o estructura anatómica normal habitual. Literatura describe al Canalis sinuosus como variación anatómica, pero estudios actuales muestran elevadas prevalencias: Rusia 67 %, Brasil 88 %, Turquía, Colombia y Chile 100 %. Este estudio encontró 100 % de prevalencia, sugiriendo que Canalis sinuosus es una estructura anatómica normal habitual. Sin embargo, Canalis sinuosus es poco conocido asociándose a numerosas complicaciones por procedimientos odontológicos y/o quirúrgicos en RMA pudiendo generar hemorragias, parestesia/disestesia, dolor agudo, etc. Elevadas prevalencias reportadas sugieren que Canalis sinuosus es una estructura anatómica normal habitual y no una variación anatómica, pero se requieren más estudios y consensos para aseverarlo. Es de relevancia clínica conocer la existencia y localización del Canalis sinuosus para evitar complicaciones.

Canalis sinuosus, an intraosseous canal located in the anterior maxillary region, contains anterosuperior alveolar vascular-nervous elements. Various interventions in anterior maxillary region such as implant placement, extractions, installation of orthodontic microscrews, surgical procedures, among others, can compromise the Canalis sinuosus and/or its accessory canals, damaging the elements contained inside, causing complications such as bleeding, paresthesia, dysesthesia, etc. Given the great ignorance of its existence, Canalis sinuosus is frequently confused with pathological and/or endodontic lesions. Classically, the literature describes it as an anatomical variation, however, it presents high prevalence (51.7 %-100 %), this assertion being questioned. Objective: to determine the prevalence and anatomical characteristics of Canalis sinuosus using Cone Beam CT in Chilean patients from the IMAPROX® radiological center between 2017-2021. Retrospective analysis of 220 anonymous maxillary CBCT, considering variables sex, presence of Canalis sinuosus, uni/bilateral Canalis sinuosus, largest diameter of Canalis sinuosus, presence/number of accessory canals. Univariate and bivariate statistical analysis. The 100 % prevalence of Canalis sinuosus in both sexes, 100 % bilateral presence. Canalis sinuosus average major diameter: 2.58 mm, 76.8 % presented accessory canals, with the presence of 2 accessory canals being more prevalent (34.1 %). A habitual normal anatomical structure must have a prevalence of over 50 % to be considered as such, but there is no consensus on the criteria used to define anatomical variation or normal anatomical structure. Literature describes Canalis sinuosus as anatomical variation, but current studies show high prevalence: Russia 67 %, Brazil 88 %, Turkey, Colombia and Chile 100 %. This study found 100 % prevalence, suggesting that Canalis sinuosus is an normal anatomical structure. However, Canalis sinuosus is little known as it is associated with numerous complications from dental and/or surgical procedures in anterior maxillary region, which can cause bleeding, paresthesia/ dysesthesia, acute pain, etc. High reported prevalences suggest that Canalis sinuosus is an normal anatomical structure and not an anatomical variation, but more studies and consensus are required to confirm this. It is clinically relevant to know the existence and location of Canalis sinuosus to avoid complications.

A rare find of a maxillary third molar with five roots: a case report of an unusual morphology.

Third molars are frequently absent or impacted; their unpredictable prevalence and morphology, with frequent anatomical variations, is a challenge for the practitioner. The number of roots of the upper third molars vary from one to five, but five roots upper third molars' cases are extremely rare. The case reported here is of a normotrophic male patient, with no significant general medical history, having extracted an impacted maxillary upper molar, with an unusual position and dimensions and five completely separated formed roots, orientated in diverse directions. It highlights the importance of using the correct surgical technique, without excessive pressure, for avoiding the fracture of the maxillary tuberosity, the displacement of the molar into the pterygopalatine fossa or the opening of the maxillary sinus, especially in the absence of good quality imagistic information like cone-beam computed tomography. The case presented in this paper is very rare and highlights the significance of anatomical knowledge, which is mandatory for managing these cases, to avoid trauma, accidents, and complications and to maintain an optimal time of extraction, since such variations occur, and the conventional radiographs do not offer enough data to clarify the diagnosis.